In 2. october 2015 Aisico s.r.l. tested their rising bollard, PILOMAT 275/K4 900A for IWA 14-1:2013 reference standard and PAS68:2013 standard. 

On the standalone test of PILOMAT 275/K4 900A rising bollard had an impact rated N3C according to IWA 14-1:2013 and N3 according to PAS68:2013 standards. The nominal velocity for both standards is 48 km/h.

Description of damages:

Test vehicle: the PILOMAT 275/K4 900A totaly immobilezed the test vehicle, causing serious damages on its undercarriage. The biggest impact on the vehicle was located on the driver side, which is 1 meter deep.

PILOMAT 275/K4 900A: the bollard had minor damages. The base of the bollard did not dislocated, but the bollard itself turned in 10° angle related to its axis in the dircetion of the vehicle’s movement. It stopped the test car successfully, despite of the impact the route still remained secured. PILOMAT 275/K4 900A was working properly after the hit.

Based on the results of the test the PILOMAT 275/K4 900A got the following certifications:

–          IWA 14-1:2013 bollard V/7200 (N3C)/48/90:1.0

–          PAS68:2013 bollard V7500(N3)/48/90:1.0/2.5

The datasheet of PILOMAT 275/K4 900A is available wihout any registrations on Orion 21 Ltd’s website. www.orion21.hu

Higher security with Secuscan®

The SecuScan® under vehicle monitoring system is providing an innovative solution to monitor the undercarrige of the vehicle searching for dangerous objects such as, weapons and explosives or drugs in an easy and fast way. Using this system significantly increases permeability of the access point. The SecuScan under vehicle monitoring system basicly consist of a scanner, a controlling workstaion and a traffic light. The mobile and surface mounted systems are available with rubber or aluminum ramps. The permanent system is made of stainless steel. The scanner is making a photo of the vehicle moving above, therefore it is possible to scan trucks even with trailers. It is able to scan vehicles with speed of 40km/h or below.

Main features:

–          simple, fast and secure scanning

–          able to scan any type of vehicle

–          permanent or mobile systems

–          easy to install and configure, even in case of built-in system

–          black and white, colored

–          4k vertical resolution

Optional possiblities:

–          overview cameras

–          automatic number plate  recognition

–          automatic detection of unsual objects*

*the system compares the actual photo with a previously one, in case of difference it can cause alarm (ANPR is necessary)

What is Thermal Radar?

Thermal Radar is an innovative, award-winning thermal vision device, which gives you 360° field of view, with high performance thermal camera and intelligent geographical information platform. Due to this, it provides outstanding surveillance and detection possibilities for end users.

With fixed Thermal Radar excellent quallity 360° rotating camera you are able to observe the field of interest and detect persons, vehicles, animals and thermal prints of fire in a panoramic view. This uniqe and stand-alone sentinel analisies the field of interest in range of 600m and alarm sin case of intruding, which can be forwarded via GSM, CDMA, WiFi or satellite.

Fieds of application:

Video surveillance

Modern, affordable thermal camera system, which was inimagineable so far. Dozens of organisation are trying for so long to replace their traditional security cameras to expensive, but much more reliable thermal cameras. The Thermal Radar is cost-effective and provides a great opportunity to advance or replace security devices of your territory for instance, large floor place car parks, bridges, electricity generators, reservoirs.

16 cameras could be replaced by Thermal Radar with thermal sensor which has 6W energy consuption. Due to this, Thermal Radar is perfect solution for mobile sites, because of the low energy consuption, therefore it could maintained by solar panels. It is also applicable to secure critical infrastructures and far from populated areas.

Traffic control

A new and exiciting field of application, where the role of Thermal Radar is to control and observe traffic. The camera’s 360° field of view makes it possible to inspect a whole junciton at once. Therefore the control system of the juction only needs one camera to get signals that are needed for the controlling. These can be triggered by a moving vehicle or a person on the pedestrian crossing. The view of an individual camera and its intelligence can make up for the loop that detects vehicles, sensors of lane controller radars and the buttons for pedestrians.

Fire detection

Thermal Radar is also suitable for detecting and indicating forest fires. Installed with 10m height column and with appropriate settings, it is possible to detect a fire with 3m dimensionals in a 5km range.

Advantage of Thermal Radar

Thermal Radar is a new approach of surveillance and detection which creates an outstanding philosophy. Places where security means installing dozens of cameras to keep real or virtual fences meghatározottunder watch, Thermal Radar is a way more cost effective solution in one device with 360° HD panoramic view. That one camera installed to the right spot is able to detect and realize numerous attempts of intruding.

TIR software

The industry leading software platform of the camera is providing you a possibility to monitor attempt of intruding or follow up the intruder. The software immediately notifies users about intruding to the secured territory and forwards the alarms on the specified communication channels.

In 2. september 2014 Aisico s.r.l. tested their high security, anti-terrorist rising bollard, PILOMAT 275/M50-1200A for PAS68:2013 standard.

On the test of PILOMAT ROAD BLOCK RB1000 road blocker had an impact rated N3 according to PAS68:2013 standards, which equeals to in impact of 7500 kg truck with speed 80 km/h.

Description of damages:

Test vehicle: the PILOMAT 275/M50-1200A rising bollard totaly immobilezed the test vehicle, causing serious damages on its undercarriage. The biggest impact on the vehicle was located on the driver side, which is 1.4 meter deep. The the vehicle’s cabin detached and landed 8 meter further from the bollard.

PILOMAT 275/M50-1200A: the bollard had minor damages. The base of the bollard and the bollard itself dislocated turned in 2° angle related to its axis in the dircetion of the vehicle’s movement. It stopped the test truck successfully, despite of the impact the route still remained secured. PILOMAT 275/M50-1200A was working properly after the hit.

Based on the results of the test the PILOMAT 275/M50-1200A got the following certification:

–          PAS68:2013 rising bollard V7500(N3)/80/90:1.4/8.0

The datasheet of PILOMAT 275/M50-1200A is available wihout any registrations on Orion 21 Ltd’s website. www.orion21.hu

The new ULISSE NETCAM Full IP PTZ is unique on the market, which is able to move SD, HD and megapixel cameras.

All the functions of the rotation device and the camera are available in popular video management systems. To control the camera, zoom optics and PTZ substructure all you need is an IP address. The system is able to operate via ONVIF Profile S protocol or the camera’s own protocol. The ULISSE NETACAM PTZ the most powerful, efficient and competitive product ont he outdoor CCTV positioner system market.

This unique integrated PTZ allows you to choose freely of the best IP cameras and zoom optics, in order to have quality view. The unit can be equipped with 2 pieces of high performance IR LED, providing you excellent quality view at night time, over 240m far. It is environment resistable between -30°C and +50°C. The window of the camera shell can be cleared by the integrated screen wiper. Unlike dome cameras, ULISSE NETCAM is way more resistive against vibrations.